solidification的例句大全

This study provides the foundation ac cording for developing the green solidification grain refine technique of aluminum alloy.

这一研究结果为开发铝合金绿色凝固细晶技术提供了基础依据。

互联网摘选

Factors affecting strength of new material of solidification in DJM pile

粉喷桩固化剂新型材料强度的影响因素

互联网摘选

Test plate of Fe 6 5% Si alloy is prepared by directional solidification, which is studied by optical microscope observation, X ray diffraction analysis, EBSD investigation and magnetic determination.

采用定向凝固方法制备了Fe65%Si实验合金板，并进行了金相观察、X射线衍射分析、EBSD分析和磁性测定。

互联网摘选

A New Vacuum and High Temperature Gradient Directional Solidification Equipment

高梯度定向凝固设备

互联网摘选

The study of high temperature gradient directional solidification equipment

高温度梯度定向凝固装置的研究

互联网摘选

This paper systematically studied the deformation process, strain mechanism, texture characteristic and mechanical property of polycrystalline pure copper and directional solidification pure copper during ECAP.

本文系统的研究了多晶纯铜和定向凝固纯铜在ECAP中的变形过程、应变机理、织构特征和力学性能。

互联网摘选

Transfer Mechanism of Heavy Metals during MSW Incineration and Solidification/ stabilization Technology of Heavy Metals in MSW Fly Ash; The Application of Fluidized Bed Incineration Technology in the Field of Organic Waste Liquid Disposal

垃圾焚烧过程重金属污染物迁移机理及稳定化处理技术研究流化床焚烧技术在有机废液无害化处理领域的应用

互联网摘选

The Microstructure and Properties of Cu-Cr In-Situ Composites under the Tecnology of High Temperature Gradient Directional Solidification

高梯度定向凝固Cu-Cr自生复合材料的组织与性能

互联网摘选

After investigations of new type low temperature solidified low density cathode electrophoresis paint ( KNT831), the results show that this product has an improved performance such as solidification at low temperature, dried paint film with decreased-density, minus vector reduction and electrophoresis throwing power.

研究了新型低温固化低密度阴极电泳漆（KNT831）的性能。研究结果表明，该产品的性能有较大的提升，即固化温度降低、干膜密度降低、减失量降低、泳透力提高。

互联网摘选

The Determination of Temperature Gradient in Front of the Solid-Liquid Interface during Unidirectional Solidification of Metals

金属单向凝固过程中固&液界面前沿液相中温度梯度的确定

互联网摘选

Numerical Simulation of Mold Filling and Solidification and Experimental Analysis in Furnace Grate Investment Castings

炉排片熔模铸造充型与凝固过程的数值模拟及验证

互联网摘选

However, it is easy to form porosities during traditional die casting because of its wide solidification temperature interval.

但是其凝固温度范围宽，在传统压铸生产时容易形成缩松。

互联网摘选

Design of Inspecting and Controlling Temperature of Micro-wave Solidification Used in Glue-repair

用于胶接抢修的微波固化温度监控系统设计

互联网摘选

The calculated temperature field of solidification of 60t ingot conforms to the trend of solidification of ingot.

60t钢锭的计算温度场符合钢锭的凝固趋势。

互联网摘选

In order to verify the mathematical model, experiments were carried out on a small-scale caster. Thermocouples column were adopted to measure the temperature of initial solidification area.

同时，为验证数值模拟结果的正确性，文中设计了实验室的小型连铸实验，并以锡为模拟介质，采用热电偶序列对初始凝固区域温度进行测量。

互联网摘选

The heat transfer in continuous casting of Tin was calculated with this model, it was found that temperature of initial solidification area was varied periodically along with mold oscillation.

在此基础上，模拟了结晶器振动条件下的锡液初始凝固传热行为，发现锡连铸中，初始凝固区域温度随结晶器振动而发生周期性变化。

互联网摘选

The dynamic temperature fields of solidification process result in the uneven shrink of every part of castings and cause the thermal bending moment to act on the castings, finally the casting rod yields and deforms.

铸造过程中的动态温度场导致铸件各部位的不均匀收缩，引起了作用于铸件截面的热弯矩，致使杆状铸件挠曲变形；

互联网摘选

Temperature Field Simulation of Solidification Process of Damping Barrel in Motorcycle

摩托车减震筒凝固过程温度场数值模拟

互联网摘选

Computer simulation of two-dimensional temperature field of casting solidification

铸件凝固二维温度场的计算机模拟

互联网摘选

The method of solidification is simple and the shape and size of pastilles are uniform.

该方法工艺简单，所制得颗粒球形度好，大小均匀。

互联网摘选