According to the theory of electromagnetic radiation, the radiating field of the PD pulse current under the influence of the metallic tank shell is deduced and its transverse electromagnetic wave characteristic is analyzed in this paper.

1、

This article uses nonlinear finite-element method, including both geometric and material nonlinearity, when modeling a axisymmetric loaded tank shell model in a typical range of dimension by a quasi-static elastic-plastic buckling approach.

在考虑大变形几何非线性和材料非线性条件下，本文利用非线性有限元法，以轴对称载荷壳单元模型，对一定尺寸范围内的储罐进行了准静态弹塑性屈曲分析。

互联网摘选

2、

Cleanout hole series can be set at the cornet from the bottom tank shell course to the bottom of the heavy oil storage tank for cleaning and draining during maintenance.

清扫孔装于重质油罐底部、清扫孔油罐可放出污水扫除内污泥。

互联网摘选

3、

As the LNG being jetted out of the cracks, the tank shell stress has been at the lowest yielding point of steet.

当液化石油气从裂缝中喷出时，壳壁的应力巳达钢材的最低屈服点。

互联网摘选

4、

By integral spinning, a tank shell was produced which showed deductions in weight and weld seam by30% and 70% respectively.

用内旋压、无模摩擦收颈旋压方法，试制出整体旋压油箱壳体，减轻质量30%，减少焊缝70%。

互联网摘选

5、

A rational method is presented for calculating the ultimate strength of the pressure hull plate and the buckling load of the tank shell.

提出了液舱区耐压船体壳板极限承载能力及波舱壳板失稳压力的计算方法。

互联网摘选

6、

Description is made in detail from the aspects of tank shell construction design, design and selection for main parts and configuration of seal protection system etc.

从罐体结构设计、主要元器件的设计和选用、密封保护系统的配置等方面进行了较详细阐述。

互联网摘选

7、

Numerical Simulation of Positive Installing Style Toggle-Drawing Forming for the Covering Part of the Fuel Tank Shell

油箱壳体覆盖件正装式双动拉伸成形数值模拟

互联网摘选

8、

The technological characteristics and process of the cold forming of spherical storage tank shell are described based on practical experiences.

阐述了球形储罐壳板冷压成型的工艺特点、方法以及多年压制球罐的实践经验。

互联网摘选

9、

Optimum of connection structure between support and tank shell for 10000m~ 3 nature gas spherical tank

10000m~3天然气球罐支柱与球壳连接结构的优化

互联网摘选

10、

Reason Analysis of Large-Size Storage Tank Shell Sinkage or Collapse and its Appropriate Repair

大型贮罐吸瘪原因分析及修复

互联网摘选

11、

Design and Calculation of the Clutch of Power-shift Transmission Wind Power Lift-up Tank Shell

动力换档变速箱离合器的设计与计算风力顶升罐体技术的开发

互联网摘选

12、

The Cold Forming Process of Spherical Storage Tank Shell

球形储罐壳板冷压成型工艺

互联网摘选

13、

Technological analysis and design of flanging die for fuel oil tank shell

油箱壳体成形工艺分析与翻边模设计

互联网摘选

14、

Study on the Spinning Technology of Integral Tank Shell

油箱壳体整体旋压工艺研究

互联网摘选

15、

On the computing method of submarine's pressure tank shell strength

潜艇耐压液舱壳板强度的计算方法研究

互联网摘选

16、

It can also avoid pretermission of plating, burnout of zinc layer on weld beam and heat affected zone, and other limitations on the inner surface of fuel tank made of galvanized sheet.

从而避免了传统电镀锌板直接焊接成型油箱内表面漏镀、焊缝及热影响区锌层烧损等缺陷。

互联网摘选

17、

It consists of a tank built from heavy sheet iron in which I store air under a pressure of fifty atmospheres.

它有一个厚钢板制的密封瓶，瓶中满贮五十大气压力压缩的空气。

互联网摘选

18、

The Experiment and Research of Sedimentation Tank with Wing Sheet Type Inclined Plates

翼片斜板沉淀半生产性实验研究

互联网摘选

19、

Pb-free and Cr ( IV)-free prepainted steel sheet with excellent corrosion resistance, formability and weldability is the development direction of automotive fuel tank steel sheet.

具有优良耐蚀性、成形性和焊接性的无Pb、无Cr（VI）预涂层钢板已成为汽车燃油箱钢板发展的方向。

互联网摘选

20、

With the increasing demand of industry for oil in transportation, aviation, etc, the tank semi-trailer plays an important role as an carrier in oil transportation, and the demand for large-scale tank semi-trailer is increasing.

随着我国运输、航空等行业对油的需求量越来越大，油罐半挂车作为运载各种油的运输工具发挥着重要作用，大型油罐半挂车的需求量也日益增加。

互联网摘选