FPGA

Finally this circuit verified by FPGA and the test result given.

最后,通过现场可编程门阵列(FPGA)验证,给出了测试结果.

互联网摘选

Lastly the digital signal processing block made of FPGA + DSP is presented.

最后给出了由FPGA+DSP构成的数字信号模块的实现过程.

互联网摘选

Responsibility: 1. Design high speed FPGA board for algorithm verification . 2.

工作职责: 1. 设计用于算法验证的高速FPGA板.

互联网摘选

Detecting Wireless Meteorological Facsimile Map Based on FPGA

基于FPGA的无线气象传真图的识别

互联网摘选

The smoothly running of step motor can be implemented using FPGA.

用现场可编程门阵列(FPGA)实现步进电机平滑运行.

互联网摘选

Realizing positive justification and simple BER tester with a FPGA individually.

在FPGA上分别设计实现了正码速调整和简单误码率测试仪,并连接成功.

互联网摘选

A trigger signal generator based on FPGA is introduced in this article.

介绍了一种基于可编程逻辑门阵列(FPGA)的脉冲触发信号发生器.

互联网摘选

As a result a new generation of telecommand channel FPGA with more strong fault tolerant ability has been developed, which can implement fault tolerance itself and weaken the influence from defect cluster.

针对FPGA缺陷成团性，进行遥控指令通道FPGA布局优化，最终设计出能够自主容错，容错能力更强，可以应对缺陷成团性影响的新一代遥控指令通道FPGA。

互联网摘选

The software includes program for FPGA programming and PCI bus device driver.

软件主要包括FPGA编程和外部设备互连PCI总线驱动程序.

互联网摘选

The tapped delay line method and the implementation of this method in FPGA are presented.

文章首先介绍了主流的几种时间间隔测量方法，特别是设计采用的抽头延迟线法，并且简要分析了这种方法在FPGA内部的实现途径。

互联网摘选

Using the MCU control the FPGA driven module advance speed control accuracy.

由于单片机控制模块的使用使得FPGA驱动模块对定位控制更加方便,速度控制精度很高.

互联网摘选

The FPGA implementation scheme of LPT is also discussed in the paper.

给出了对数极坐标变换的FPGA实现方案.

互联网摘选

System hardware and software design idea is presented, the analog front-end chip in hardware is used for sensor signal pre-processing, FPGA is performed signal processing, such as filtering, signal pick-up etc, the analog and digital blocks are connected with bridges.

硬件中的模拟前端器件用于获取传感器信号并进行预处理，数字部分的现场可编程门阵列（FPGA）用于数字信号处理，如滤波、信号提取等，模拟模块与数字模块通过桥路连接。

互联网摘选

The testing system based on FPGA is given out and the presented scheme has been verified. The digital-analog mix-mode chip in the capsule has been implemented in 0.18 μ m CMOS process.

系统胶囊内的数模混合芯片已采用0.18μM CMOS工艺流片。

互联网摘选

This paper introduces a FPGA-based TFT-LCD display controller design and implementation methods.

文章介绍了一种基于FPGA的TFT-LCD显示控制器的设计和实现方法.

互联网摘选

An FPGA is a chip that consists of many unconfigured logic gates.

FPGA是一种包含许多未配置逻辑门的芯片.

互联网摘选

The FPGA Implementation of the Receiver Baseband Part of the UWB Tag Position System

UWB标签定位系统接收机基带部分的FPGA实现

互联网摘选

Design of Taxi Meter Based on FPGA

基于FPGA的出租车计费器设计

互联网摘选

From these modules, the target tracker makes a target image collection, a bottom driver from the target image display, and a program design which incorporates a target image color space transformation. The target tracker makes all these items by basing them on the FPGA.

并且在此基础上，基于FPGA目标跟踪器完成了目标图像采集、目标图像显示的底层驱动以及目标图像颜色空间转换程序设计。

互联网摘选

SRAM FPGA system soft simulation designed to realize bitwise write bitwise Reading.

FPGA系统的sram的软仿真设计,可以实现按位写,按位读.

互联网摘选

A digital control system is designed for the pump source, which contains the power detected circuit, temperature detected circuit, constant current circuit and thermo-electric cooler driven circuit. The control algorithms of power and temperature are realized in FPGA.

在泵浦源电路的设计中，采用了数字控制的方法，分别设计了功率检测、温度检测、恒流驱动和热电制冷器（TEC）驱动电路，功率和温度的控制算法用FPGA来实现。

互联网摘选

Secondly, this dissertation discusses the practical realization in DSP, microcomputer, cost calculation system in taxi and radar digital unit, and analyses the advantage of FPGA.

然后在数字信号处理、微机系统、出租车计费系统及雷达数字化单元这四个方面论述了FPGA的具体实现，并分析了用FP6A实现的优势所在。

互联网摘选

Using the reconfigurable system based on FPGA controlled by CPLD in the reconfigurable implementation of BP train Network and BP implement Network of Artificial Nerual Network.

并将由CPLD控制的基于FPGA的可重构系统应用到人工神经网络的BP网络训练和BP网络执行两个算法的可重构实现过程中并进行分析。

互联网摘选

Study of the High-speed Real-time Three-channel Pulse Compression Processor Based on FPGA

基于FPGA的高速实时三通道脉压处理器研究

互联网摘选

Then, we introduced island-style model and design flow of FPGA.

然后简要介绍了FPGA的岛状模型以及设计流程.

互联网摘选

In order to overcome the above shortcomings, this design adopts FPGA to realize the automatic extraction of endmember. The main task of the design are as follows: Firstly, the characteristics of hyperspectral data were analyzed.

为了克服以上不足，本设计采用FPGA来实现端元的自动提取。设计的主要工作如下：首先分析了超光谱图像数据的特点，归纳已有超光谱图像端元提取算法的优缺点。

互联网摘选

Logic block packing is the last procedure of FPGA technology mapping.

装箱是FPGA工艺映射中的最后一步流程.

互联网摘选

Once the FPGA design has been captured and compiled and initially downloaded to the HW target, configuration tracking needs to be maintained at the board level in the lab.

当FPGA设计完成了设计捕获、编译并第一次下载到了目标电路板上，就需要在实验室中开始维护板级配置跟踪文档。

互联网摘选

Pin on the FPGA chip packaging some of the information.

有关FPGA芯片的管脚的封装的一些资料.

互联网摘选

Design and Implementation of Satellite Telemetry and Telecontrol Channel Sub-system Based on FPGA

基于FPGA的卫星遥测遥控通道设计与实现

互联网摘选