detaching

[dɪ'tætʃɪŋ]
  • detaching
  • v.

    拆卸( detach的现在分词 );派遣;分遣;分派;

纠错 数据更新时间:2026-04-17 21:16:24
1、

The calculation reveals that 36 index cylinder location, larger noil gauge and later timing of detaching roller clockwise revolving should be adopted in E7/ 6 comber.

得出在E7/6型精梳机上采用112°梳理面的锡林时,应采用36分度的锡林定位、较大的落棉隔距及较晚的分离罗拉顺转定时。

互联网摘选

2、

Detaching Mechanism Between Media-handling and Communication-controlling in Videoconference Based on IP

IP会议电视系统中通信控制和媒体处理功能的分离

互联网摘选

3、

The test shows that the quality of comb sliver can reach Uster 25%, the effective delivery length is shortened and the piecing length of delivery cotton web of detaching roller is increased, and the quality of comb sliver is enhanced effectively.

经检验,所纺精梳条质量达到Uster公报25%水平,CJ40型棉精梳机有效输出长度缩短、分离罗拉输出棉网接合长度增加,有效地提高了精梳条质量。

互联网摘选

4、

On the basis of the inverse die contact tracking method, the track fit revising method is put forward to establish the criterion of node detaching from die, and the time sequence of boundary node releasing from die is determined.

在反向模具接触跟踪方法的基础上,提出了采用跟踪拟合修正方法来建立有限元反向模拟的脱模准则,并采用该方法确定了叶片精锻三维有限元反向模拟中边界节点脱离模具的时间序列。

互联网摘选

5、

Two-part serrated nozzle for easy removal without detaching hoses.

不用与内部管路分开,就可以轻易拆开、装管口喷嘴.

互联网摘选

6、

The detaching distance is an important parameter for adjusting comber noil and combing quality.

落棉隔距是影响精梳机落棉率与梳理质量的重要参数.

互联网摘选

7、

Call money and discount market Short cycle times can be achieved by detaching the mold plates before the concrete is completely set up.

短期拆放和贴现市场在混凝土完全硬化之前拆模可以缩短周期时间。

互联网摘选

8、

The analytical method is applied in deriving equations for the displacement, velocity and acceleration of the detaching roller installed in the differential mechanism.

本文采用解析法导出了这种差动机构中拔取罗拉的位移,速度和加速度的方程式。

互联网摘选

9、

In the early 70's, the Cam-Clutch mechanism for driving detaching roller of the cotton comber was successfully replaced by the multiple-bar linkage combined with differential gears, which has resulted in a considerable rise in the running speed and productivity of the combing machine.

七十年代初期,在国产棉精梳机上,用多连杆-差速器机构代替了凸轮-离合器机构传动分离罗拉,使棉精梳机的运转速度与生产率有很大的增长。

互联网摘选

10、

Movement law of detaching roller on E62 and E7/ 6 comber are calculated and analyzed by computer, and the varying law of detachingoverlapping process on the two kinds of combers is studied.

采用电子计算机对E62、E76型精梳机分离罗拉的运动特性进行计算与分析。研究了2种精梳机分离罗拉的运动规律及分离接合工艺的变化规律。

互联网摘选

11、

The approach of detaching data from a process has been discussed several times ( for example, in the Claim Check pattern article).

有一些文章讨论了分隔流程与数据的方法(例如Claim Check pattern)。

互联网摘选

12、

Technical inspection and non-detaching repair shall be carried out for originating and receiving passenger trains.

对始发、到达旅客列车进行技术检查及不摘车修理。

provided by jukuu

13、

This article states the merits and demerits of cotton comber mechanism in various kinds and its development trends from the feed mechanism, clamping and feeding mechanism, cylinder and top comb mechanism, driving mechanism of detaching roller and drafting mechanism.

本文从精梳机的喂入机构、钳持给棉机构、锡林与顶梳机构、分离罗拉传动机构及牵伸机构等方面阐述了各种棉精梳机机构的优缺点和发展趋势。

互联网摘选

14、

Development of Metal Bellows Loading Gasbag of Detaching Top Roller on CA 723 Comber

CA-723型精梳机分离胶辊金属波纹管加压气囊的研制

互联网摘选

15、

The Design of Detaching Lapping Mechanism of Combing Machine

浅析精梳机分离接合机构的设计

互联网摘选

16、

According to Transocean, they did not take any action to stop the procedures then under way for detaching the rig from the well.

Transocean公司称,BP未采取任何措施停止当时正在进行的将钻井平台脱离油井的程序。

互联网摘选

17、

Win between " detaching and attaching " and " old and new "

赢在 “ 分聚 ” “ 新旧 ” 间黄升民.

互联网摘选

18、

The main and auxiliary guidance mechanisms have been designed to guarantee the moving direction of the vehicle. Secondly, detaching mechanism has been designed.

设计了主辅导向机构,共同保证被试车辆的运动方向。其次,设计了脱开机构。

互联网摘选

19、

When the fibre placement is finished, the tows cover the surface all over, no stacking and detaching.

铺丝完成时,丝束“包裹”整个曲面,无堆叠和分离现象。

互联网摘选

  • 相关词组
  • 今日热词
  • 热门搜索

微语录(www.volg.cn)为您提供在线词典、英语翻译、单词大全、英译汉、汉译英等英语服务!可通过lj:关键词格式搜索句子,如lj:affect,搜索affect相关的双语例句!

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈